heavy water pedal ThorpyFX Heavy Water Dual Boost

heavy water pedal ThorpyFX Heavy Water Dual BoostThe ThorpyFX Heavy Water was born from customer demand for the boost side of THE DANE pedal to be made into its own pedal. As such, the Heavy Water is a dual boost pedal with a twist. The right hand side is the same as the boost found on THE DANE. The left hand side is similarly designed but with more grit drive available from its Germanium clipping stage. The pedal is designed so that the DANE boost runs into the Germanium boost side. This yields

The ThorpyFX Heavy Water was born from customer demand for the boost side of THE DANE pedal to be made into its own pedal. As such, the Heavy Water is a dual boost pedal with a twist. The right-hand side is the same as the boost found on THE DANE. The left-hand side is similarly designed but with more grit/drive available from its Germanium clipping stage. The pedal is designed so that the “DANE” boost runs into the Germanium boost side. This yields three distinct tonal variations ranging from clean boost all the way through to really heavy saturation, when combined with your amp.

With both sides engaged the HEAVY WATER sends a high headroom amp into really heavy distortion. The pedal can also be used as a low boost to subtly polish your sound and fatten up your tone.

There is a footswitch for each side, they can be used independently or combined. It uses top-mounted input/output jacks to maximize pedalboard real estate. Powered by standard 9V center-negative power supply, using 1% metalfilm resistors, WIMA and Panasonic capacitors where possible, Burr-Brown Op-amps and robust through hole gold-plated PCB’S. Soldered with lead-free solder.